The SA-Rift_46G cabinets deliver professional bass and guitar tone in a compact format that fits where larger rigs won't. This pair gives you the flexibility to run stereo, stack for more output, or use one cabinet for practice and backup.

Each cabinet handles 250 watts RMS with four 6-inch drivers featuring 30-ounce magnets and 1.5-inch Kapton voice coils. The 4x6 configuration produces fuller low-end response than single-driver cabinets while maintaining clear midrange articulation that cuts through a band mix.

At 8 ohms impedance with 92dB sensitivity, these cabinets work efficiently with most bass heads and guitar amplifiers. The 85Hz to 5kHz frequency response covers the fundamental range for both bass guitar and electric guitar applications. The 5/8-inch plywood front panel and tolex construction with metal corners provide road-ready durability at 36 pounds per cabinet.

These cabinets work well for rehearsal spaces, small club gigs up to 100 people, and recording sessions where you need guitar cabinet tone without overwhelming volume. The compact 17.5" x 16" x 18" footprint fits in smaller venues and vehicles where 4x12 or 4x10 cabinets won't.

Each cabinet includes dual 1/4-inch inputs in a recessed terminal cup for connecting your amp head or running speaker cables between cabinets. The metal grille and recessed handle complete the professional presentation.

Seismic Audio backs each cabinet with a one-year warranty and ships from our warehouse for reliable delivery timing.

Technical Specifications

Frequently Asked Questions

Can these cabinets handle both bass guitar and electric guitar?

Yes, the SA-Rift_46G cabinets work for both bass and guitar applications. The 85Hz to 5kHz frequency response covers the fundamental frequencies for both instruments. The four 6-inch drivers with substantial magnets provide enough low-end response for bass guitar while maintaining the midrange clarity guitarists need for tone shaping.

What size venues are these cabinets suitable for?

These cabinets work best for smaller venues up to 100 people, rehearsal spaces, and recording studios. While they can be stacked or paired with additional cabinets for more output, their 250-watt RMS rating makes them ideal for situations where you need professional tone without overwhelming volume levels.

What cables do I need to connect these to my amplifier?

You'll need standard 1/4-inch speaker cables to connect from your amp head to the cabinets. Each cabinet has dual 1/4-inch inputs, so you can daisy-chain them together or run separate cables from a multi-output amp head. Never use instrument cables for speaker connections - only use cables rated for speaker-level signals.

How do these compare to traditional 4x10 or 4x12 cabinets?

The 4x6 configuration offers a middle ground between smaller practice amps and full-size cabinets. You get more low-end response than single-driver cabinets but in a much more portable package than 4x10 or 4x12 rigs. At 36 pounds each, they're significantly lighter while still providing the multi-driver sound many players prefer.

Can I run these cabinets in stereo with my amp?

Yes, if your amplifier has stereo outputs or you're running two separate amps, you can use these cabinets in stereo configuration. Each cabinet is 8 ohms, so they'll present the correct impedance load for most amplifier setups. Check your amp's minimum impedance requirements before connecting.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov