The Quake-6 16-ohm replacement drivers deliver professional-grade sound reproduction for DIY speaker builders and anyone needing reliable midrange drivers. These 6-inch woofers handle the critical 500Hz to 5kHz frequency range where vocals and instruments live, making them essential components for custom PA systems and speaker cabinet repairs.

Each driver produces 50 watts RMS and peaks at 100 watts, providing the headroom needed for live performance without distortion. The 30-ounce magnet and 1.5-inch voice coil work together to deliver 95dB sensitivity, ensuring efficient power conversion and strong output from your amplifier.

The pressed steel chassis provides durability for regular transport and setup, while the paper cone delivers natural midrange response that works well for both spoken word and music reproduction. At 16 ohms impedance, these drivers are ideal for series wiring configurations or matching specific amplifier requirements. The 500Hz to 5kHz frequency response makes them perfect for two-way or three-way speaker designs where dedicated tweeters handle the highs.

These drivers work well in custom monitor wedges, small venue PA systems, or home studio monitors. They're particularly effective in churches and conference rooms where speech intelligibility is critical, handling venues up to 150 people when properly paired with appropriate amplification.

Each driver weighs 4 pounds and comes ready to mount in your custom enclosure. Standard speaker wire connections make installation straightforward for any cabinet design.

Seismic Audio backs these drivers with a one-year warranty and fast shipping. Professional-grade components at a price that makes custom builds affordable.

Technical Specifications

Frequently Asked Questions

What impedance wiring options do I have with 16-ohm drivers?

With two 16-ohm drivers, you can wire them in parallel for an 8-ohm load or in series for a 32-ohm load. Parallel wiring is most common for standard amplifiers, giving you combined power handling of 100 watts RMS. Series wiring creates a 32-ohm load that works well with certain vintage amplifiers or specific crossover designs.

What size venues can these drivers handle?

A pair of Quake-6 drivers can effectively cover indoor venues up to 150 people when properly amplified and housed in appropriate enclosures. They work well for conference rooms, small churches, coffee shop performances, or home studios. For larger venues or outdoor events, you'll want to step up to 8-inch or 10-inch drivers with higher power handling.

Do I need a crossover with these drivers?

Yes, these drivers are designed for 500Hz to 5kHz, so they need both high-pass and low-pass filtering in a complete system. You'll need a crossover network to blend them with tweeters above 5kHz and woofers or subwoofers below 500Hz. They work well as midrange drivers in three-way systems or paired with tweeters in two-way designs.

What enclosure volume works best for these drivers?

These drivers work well in sealed or ported enclosures between 0.3 and 0.8 cubic feet internal volume. Smaller sealed boxes provide tighter response for monitor applications, while larger ported boxes extend low-frequency response. The pressed steel frame is rigid enough for either mounting style.

Can I use these to replace blown drivers in existing speakers?

These work as replacements if your original drivers were 6-inch, 16-ohm units with similar frequency response. Check your existing driver's impedance marking and measure the mounting holes before ordering. The 500Hz to 5kHz response makes them suitable for midrange duty in most PA speakers, but they won't work as full-range replacements without additional drivers.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov