The SPRW35 bridges the gap between professional PA speakers with Speakon connectors and home audio equipment with binding post terminals. This 35-foot cable is built for musicians, DJs, and audio enthusiasts who need to connect powered speakers or monitors to amplifiers, receivers, or mixing boards that only have red and black wire terminals.

The raw wire to Speakon design eliminates adapter hassles and provides a direct connection path. One end terminates in stripped 16-gauge wire that connects to binding posts, while the other features a locking Speakon connector that ensures secure speaker connections during transport and performance.

The 16-gauge conductors deliver clean signal transmission for most PA applications, while PVC jacketing and internal shielding protect against interference and physical damage. At 35 feet, this cable provides enough reach for stage setups, installed sound systems, or home theater configurations where speakers need to be positioned away from the source equipment.

This cable works particularly well for connecting powered PA speakers to DJ mixers, home receivers driving passive monitors, or permanent installations in small venues and houses of worship. The length accommodates most stage layouts and room configurations without excess cable management.

Simply strip the raw wire ends to the appropriate length, connect positive and negative to your amplifier's binding posts, and lock the Speakon connector into your speaker. The cable ships ready to use with Seismic Audio's one-year warranty and fast shipping nationwide.

Technical Specifications

Frequently Asked Questions

What equipment does this cable connect?

This cable connects amplifiers, receivers, or mixers with binding post outputs (red/black terminals) to speakers with Speakon inputs. It's commonly used to connect home stereo equipment to powered PA speakers, or to connect DJ mixers to monitor speakers with Speakon connectors.

Is 16-gauge wire sufficient for my speakers?

16-gauge wire handles most home audio and smaller PA applications effectively. It's suitable for speakers up to around 400 watts and runs up to 50 feet without significant power loss. For higher-powered systems or longer runs, consider upgrading to 12-gauge speaker cable.

How do I connect the raw wire end?

Strip about 1/2 inch of insulation from each conductor, twist the strands tightly, and insert into your amplifier's binding posts. Connect the marked conductor to positive (red) and unmarked to negative (black). Always power down your equipment before making connections.

Can I use this for permanent installation?

Yes, the PVC jacket and shielded construction make this suitable for permanent installations in walls or conduit. The 35-foot length works well for most room installations, and the Speakon connector provides a secure, professional connection that won't work loose over time.

Will this work with my powered speakers?

This cable works with any speaker that has a Speakon input, whether powered or passive. For powered speakers, you're connecting the line-level signal from your mixer or source to the speaker's input. For passive speakers, you're connecting amplifier power through the Speakon connector.

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer. For more information, go to: www.P65Warnings.ca.gov