Seismic Audio offers 2 different kinds of Splitter Snake Cable, Standard and Rack Mountable! Splitter snake cables take the inputs from the stage and then, through a hardwired Y cable split, send identical signals to the two different fantails attached to the input box. There are many reasons this can be useful to the professional musician or sound engineer. The two most popular are live recording and monitor mixing. Both will work in a similar way, made possible by the Seismic Audio Speakers splitter snake cable. The input box will be placed on stage and all instruments plugged into it. One of the two fantails will be sent to the front-of-house mixing position, as usual. The second fantail gives you unique opportunities, however. One option is feeding an onstage monitor mixing board. This is how the big sound companies do it and now you can, too, at a fraction of the price. The other option is sending the second fantail to a recording device, whether it is a hard disk recorder or a computer recording interface. This will give you the full audio picture of what is happening on stage, unaffected by changes made to the sound at the front-of-house mixing position. That gives you full control over the sound of the live recording, making for an easier and better sounding session.
Splitter snake cables from Seismic Audio Speakers are available in a variety of sizes to meet your band's needs. Splitter snakes are available in 16 channel, 24 Channel and 32 channel configurations. Each model comes with the option of two 15 foot trunks or a 15 foot and a 30 foot trunk. Splitter snake cables feature the basic Y splitter setup. Buy splitter snake cables for the best connection between the stage and the mixer.
Splitter snake cables from Seismic Audio Speakers are available in a variety of sizes to meet your band's needs. Splitter snakes are available from 16 channel to 32 channels. Splitter snake cables feature the basic Y splitter setup. Each pair of heavy duty conductors is individually shielded, producing crystal clear sound while rejecting extraneous noise. XLR connectors make it easy to attach the splitter snake cable to amps and mixers without additional converters. Buy splitter snake cables for the best connection between the stage and the mixer.
Rack Mountable Splitter Snake Cables have the Stage Box rack mountable for convenience and ease of transport. Both fantails are well labeled and grouped by color. Both the main trunk and split trunk are built with cable that is individually shielded pairs, 22 guage, high copper purity conductors with aluminum foil shield and trace wire. You will find strain relief at both the stage box and fantail end of the snake. There is a mesh hanger at the fantail end. The female XLR / 1/4" panel jacks on the box are locking coiled spring style with non metallic bodies. The fantail is built with male XLR shells.These snakes are your basic hardwired Y splitters. They each have a stage box and two hardwired short trunks with fantails. These splitter snake cables do not have splitter transformers, ground-lift switches, or multi-pin disconnects. These splitter cables are straight send snakes and do not have any returns. The cable ends on the fantails are all male XLR, while the stage box consists of all female XLR and 1/4" combo jacks. You can plug an XLR or a 1/4" in to the box end of the snake.