The Enforcer II Pair Package delivers serious low-end reinforcement for bands, DJs, and mobile performers who need powerful subwoofers without the complexity of building a custom system. This complete package pairs two 18-inch subwoofer cabinets with a dedicated power amplifier and cables, ready to handle everything from club gigs to outdoor festivals.

Each Enforcer II cabinet houses an 18-inch woofer with a 4-inch voice coil and 120 oz magnet, delivering the deep bass response essential for electronic music, hip-hop, and rock performances. The cabinets handle 1000 watts RMS each (2000 watts peak), while the included Magnitude 2400 amplifier provides up to 800 watts RMS per channel at 8 ohms, perfectly matched to drive both subs.

Built from 5/8-inch plywood with black carpet finish and metal corners, these cabinets are designed for the road. At 90 pounds each with recessed metal handles, they're substantial but manageable for load-in. The frequency response extends from 45Hz to 2KHz with 101dB sensitivity, providing the punch needed to fill medium to large venues. Pole mounts on top accommodate your main speakers for a complete sound system setup.

This package works well for venues up to 500 people, outdoor events, and mobile DJ setups where you need to add serious low-end to your existing PA system. The dual 1/4-inch and Speakon inputs on each cabinet allow daisy-chaining for expanded systems, while the included 35-foot speaker cables give you placement flexibility.

Seismic Audio backs this complete subwoofer package with a one-year warranty and ships factory-direct to keep professional sound accessible for working musicians and mobile entertainers.

Technical Specifications

Spec	Value
Woofer	18" with 4" voice coil, 120 oz magnet
Power (RMS)	1000 watts per cabinet
Power (Peak)	2000 watts per cabinet
Impedance	8 ohms
Frequency Response	45Hz - 2KHz
Sensitivity	101dB
Amplifier	Magnitude 2400, 2-channel
Amplifier Power	2 x 800W RMS @ 8 ohms, 2 x 1260W RMS @ 4 ohms
Amplifier Frequency Response	5Hz - 50KHz +/- 0.5dB
THD+N	<0.05% @ 8 ohms 1/3 PO
Signal to Noise Ratio	>102dB
Cabinet Construction	5/8" plywood with black carpet
Inputs	Dual 1/4" and dual Speakon per cabinet
Dimensions	28"H x 22"W x 22"D per cabinet
Weight	90 lbs per cabinet
Includes	2 subwoofer cabinets, Magnitude 2400 amp, pair of 35' speaker cables
Warranty	1 year
Recommended For	Mobile DJs, bands, venues up to 500 people

Frequently Asked Questions

What size venues can this subwoofer package handle?

This Enforcer II pair package works well for venues accommodating 300-500 people, including clubs, medium-sized outdoor events, wedding receptions, and church services. The combined 2000 watts RMS provides enough low-end reinforcement for electronic music, hip-hop, and rock performances in these spaces. For smaller indoor venues under 200 people, one subwoofer might be sufficient.

What cables and connections do I need to set this up?

The package includes a pair of 35-foot speaker cables to connect the amplifier to the subwoofers. You'll need audio cables to connect your mixer or DJ controller to the amplifier's inputs. The subwoofers feature both 1/4-inch and Speakon inputs, and can be daisy-chained if you want to add more subs later. The amplifier accepts balanced or unbalanced line-level signals.

Can I use these subwoofers with my existing PA speakers?

Yes, these subwoofers are designed to work with your existing main speakers or tops. Each cabinet has a pole mount on top that accommodates standard speaker poles, allowing you to stack your main speakers directly above the subs. This creates a compact, powerful sound system that's easy to transport and set up.

How does the included amplifier match the subwoofers?

The Magnitude 2400 amplifier delivers 800 watts RMS per channel at 8 ohms, which properly powers each 1000-watt RMS subwoofer without risk of clipping or damage. The amplifier includes protection circuits for overheating and short circuits, plus smart clip limiting to prevent distortion. This matched pairing ensures optimal performance and reliability.

Do I need a crossover to use these subwoofers?

These subwoofers have a frequency response of 45Hz to 2KHz, so they'll reproduce some midrange frequencies along with the bass. For best results, you should use a crossover (either in your mixer, a dedicated crossover unit, or active speakers with built-in crossovers) to send only the low frequencies to these subs and the mids/highs to your main speakers.

Filter

Subwoofer Packages

Subwoofer Packages

Shop

Resources

Account